WH 200


2-row mounted, from 68 HP on

The WH 200 is a mounted wind-rower for various conditions.

– for the start of mechanical harvesting of potatoes or other root crops
– for the 2-stage harvest system to harvest bright and set skin potatoes
– or in combination with a potato harvester to increase the output with harvesting 2 + 2 = 4 rows .

Tractors from 68 HP upwards can operate the wind-rower with the proven digging units. Two main webs with additional drop height achieve good soil separation in all conditions, a rotary agitator to increase the soil separation are available as an option.


  • Compact and robust machine
  • Mounted machine, improves handling and maneuverability on the headland
  • WH 200 Eco – centre discharge
    • 2-phased harvest process
    • light machine for tractors with little lifting power
    • without diablo roller, avoids ridge compaction
    • one long main web, makes only one drop height at the end of the main web
    • bend at the main web end minimizes the drop height
    • triangular roller with adjustable intensity, mounted in the main web
  • WH 200 C – centre discharge
    • 2-phased harvest process
    • two short main webs with extra drop for effective sieving
    • bend at the 2nd main web end minimizes the drop height
    • triangular roller with adjustable intensity, mounted in the main web
    • Option: Rotary agitator for additional soil sieving
  • WH 200 S – side discharge
    • 2 step harvesting process – increases the output of the potato harvester
    • two short main webs with extra drop for effective sieving
    • triangular roller with adjustable intensity, mounted in the main web
    • Option: Rotary agitator

  • WH 200 Eco – centre discharge
    • through typed share for row width 75 or 90 cm
    • share frame without angle adjustment
    • 2 fixed, height adjustable disc coulters
    • without diablo rollers
    • without haulm feed-in rollers
    • one long main web
    • pitch dependent drive for the main web
    • height adjustable triangle rollers in the main web
    • 2 rear support wheels
    • drive shaft with overrun clutch
  • WH 200 C – centre discharge
    • intake width 580 mm or 620 mm
    • share frame with angle adjustment
    • Centered retaining rubber
    • 2- or 3-piece share blade- 2- or 3-piece share blade
    • 4 spring mounted disc coulters
    • 2 haulm feed-in rollers
    • 2 main webs with joiner connection
    • pitch dependent drive for the 1st and 2nd main web
    • height adjustable triangle rollers in the 2nd main web
    • 2 rear support wheels
    • drive shaft with overrun clutch
  • WH 200 S – side discharge
    • intake width 580 mm or 620 mm
    • share frame with angle adjustment
    • Centered retaining rubber
    • 2- or 3-piece share blade- 2- or 3-piece share blade
    • 4 spring mounted disc coulters
    • 2 haulm feed-in rollers
    • 2 main webs with joiner connection
    • pitch dependent drive for the 1st and 2nd main web
    • height adjustable triangle rollers in the 2nd main web
    • 2 rear support wheels
    • drive shaft with overrun clutch
    • crop cross conveyor

 WH 200 CWH 200 SWH 200 Eco
Dimensions
Length3800 mm4400 mm3800 mm
Width1900 mm2540 mm1900 mm
Height1400 mm1500 mm1400 mm
Weight
Empty weight with basic configuration1300 kg1500 kg800 kg
Drawbar
Lower linkage category2 Cat.--
Drive
Input speed p.t.o.-shaft540 rpm--
Main webs
1st main web width1700 mm--
2nd main web width1700 mm1700 mm-
1st main web sieving area1.34 m²1.34 m²3.32 m²
2nd main web sieving area2.1 m²1.91 m²-
Wheels
Wheels5.00-8155/80 R135.00-8
Tractor requirements
Engine power (min.)65 kW65 kW50 kW
Required control valves (single acting)-1-